infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Electrical - MIL ON/DTC's U1010 or U1000 Set|Page 380 > < Engine Controls - ECM Replacement Procedures|Page 374
Page 1
background image

Engine Control Module: Customer Interest
Electrical - MIL ON/DTC's U1010 or U1000 Set

Classification:
EC06-002a

Reference:
ITB06-004a

Date:
March 31, 2006

MIL "ON" WITH DTC U1000 OR U101 STORED IN ENGINE CONTROL UNIT

APPLIED VEHICLES:
2002-2004 I35 (CA33)
2002-2006 Q45 (F50)
2004-2006 QX56 (JA60)
2003-2006 FX (S50)
2003-2006 G35 (V35)
2003-2004 M45 (Y34)
2006 M (Y50)

IF YOU CONFIRM

The MIL is "ON" with

^

DTC U1000 (CAN COMM CIRCUIT) OR

^

DTC U1010 (CAN COMM) [2006 Models only] stored in the engine control unit,

and

There are no drivability incidents.

DETERMINE IF

This bulletin applies by performing steps 1 and 2 of the Service Procedure.

ACTIONS

If this bulletin applies, there may be excess resistance in certain ground connections:

^

Clean/re-tighten ECM ground connections.

^

Clean/re-tighten negative battery cable body connection and battery post connection.

^

If needed, clean and ensure good contact between the steering member assembly and the left side instrument stay assembly.

IMPORTANT:

The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing the repair.

CLAIMS INFORMATION

Electrical - MIL ON/DTC's U1010 or U1000 Set|Page 380 > < Engine Controls - ECM Replacement Procedures|Page 374