FX45 AWD V8-4.5L (VK45DE) (2006)
-
Replace front passenger air bag module if it has been dropped or sustained an impact.
-
Do not expose the front passenger air bag module to temperatures exceeding 90 degrees C (19 degrees F).
-
Do not allow oil, grease or water to come in contact with the front passenger air bag module.
-
After front passenger air bag module inflates, the instrument panel assembly should be replaced.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Always work from the side of or under front passenger air bag module.
-
After the work is completed, perform self-diagnosis to make sure no malfunction is detected. Refer to SRS-19, "SRS Operation Check". See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/Manufacturer Code Charts/Air Bag System/Diagnostic Procedures/SRS Operation Check (Procedure 1)