infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair
Page 2
background image

Install in the reverse order of removal.

CAUTION: 

-

The spiral cable may snap due to steering operation if the cable is installed in an improper position.

-

Also, with the steering linkage disconnected the cable may snap by turning the steering wheel beyond the limited number of turns. The spiral cable
can be turned counterclockwise about 2.5 turns from the right end position.

-

After the work is completed, perform self-diagnosis to make sure that no malfunction is detected. Refer to SRS-19, "SRS Operation Check".  See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/Manufacturer Code Charts/Air Bag System/Diagnostic Procedures/SRS Operation Check (Procedure 1)

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair