infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 4960 > < Transmission Temperature Sensor/Switch, A/T|Locations
Page 1
background image

Transmission Temperature Sensor/Switch: Service and Repair
Control Valve With TCM and A/T Fluid Temperature Sensor 2

Control Valve with TCM and A/T Fluid Temperature Sensor 2 

CONTROL VALVE WITH TCM ASSEMBLY REMOVAL AND INSTALLATION 

Removal 
1. Disconnect the battery cable from the negative terminal.
2. Drain ATF through drain plug.
3. Remove front cross bar. 
4. Disconnect heated oxygen sensor 2 harness connector.
5. Disconnect A/T assembly harness connector.

Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 4960 > < Transmission Temperature Sensor/Switch, A/T|Locations