FX50 AWD V8-5.0L (VK50VE) (2009)
Exterior View Display Monitor: Service and Repair
Around View Monitor Control Unit
Navigation (Single Monitor)
AROUND VIEW MONITOR CONTROL UNIT
Exploded View
Navigation (Twin Monitor)
AROUND VIEW MONITOR CONTROL UNIT
Exploded View
Navigation (Single Monitor)
AROUND VIEW MONITOR CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove front seat (LH side). Refer to See: Body and Frame/Mirrors/Service and Repair/Outside Mirror/Door Mirror Assembly/Exploded
View/Without ADP.
2. Remove floor carpet. Keep a service area.
3. Remove around view monitor control unit mounting screws.
4. Disconnect connector and remove around view monitor control unit.
INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Refer to See: Testing and Inspection/Programming and Relearning/Calibrating Camera Image (Around View
Monitor)/Description/Navigation (Single Monitor) See: Testing and Inspection/Programming and Relearning/Calibrating Camera Image (Around
View Monitor)/Special Repair Requirement/Navigation (Single Monitor), "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) :