FX50 AWD V8-5.0L (VK50VE) (2009)
/Page-1536001.png)
Rear Vision Camera: Service and Repair
Rear View Camera
Exploded View
REAR VIEW CAMERA
Exploded View
Removal and Installation
REAR VIEW CAMERA
Removal and Installation
REMOVAL
1. Remove back door outside finisher upper. Refer to See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Back Door Finisher/Exploded View.
2. Remove door handle cover. Refer to See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service
and Repair/Back Door Finisher/Exploded View.
3. Remove rear view camera mounting screws and rear view camera harness connector.
4. Remove rear view camera.
INSTALLATION
1. Installation is the reverse order of removal.
2. Adjust the guide line position if the guide line position is shifted after installing the rear view camera. Refer to See: Adjustments.
