FX50 AWD V8-5.0L (VK50VE) (2009)
7. Remove front fillet molding fixing clips (LH/RH). Refer to See: Interior Moulding / Trim/Service and Repair/Fillet Molding/Removal and
Installation.
8. Remove front fender grommets (A) with a remover tool (B).
9. Disconnect harness connectors (A) and (B) from back side of bumper fascia assembly (LH).
10. Remove bumper fascia assembly fixing screws (A) (LH/RH).
11. Remove bumper fascia assembly lower fixing clips (A) and bolts
(B).
12. Pull both side of the bumper fascia assembly toward the vehicle side to disengage both side of the bumper fascia assembly from bumper side
brackets (LH/RH).