FX50 AWD V8-5.0L (VK50VE) (2009)
(A) as shown in the figure when installing.
-
Slide the pawl while aligning with the concave part of (C).
-
Engage the joint of pawl of (A) with (B), and then assemble cowl top covers LH (1) and RH (2).
CAUTION:
-
Always replace EPT sealer with a new one, if the cowl top cover is reused.
-
After installing, perform adjustment of wiper arm. Refer to See: Wiper and Washer Systems/Wiper Arm/Adjustments/Front Wiper Arm
and Blade.