FX50 AWD V8-5.0L (VK50VE) (2009)
Front Door Interior Handle: Service and Repair
Removal And Installation
FRONT DOOR LOCK
INSIDE HANDLE : Removal and Installation
REMOVAL
1. Remove front door finisher. Refer to See: Front Door Panel/Service and Repair/Removal and Installation.
2. Disconnect door lock cables from inside handle.
3. Remove inside handle mounting screws, and then remove the inside handle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Check door lock cables are properly engaged with inside handle.
-
After installation, check door open/close, lock/unlock operation.