FX50 AWD V8-5.0L (VK50VE) (2009)
Rear Door Striker: Service and Repair
Removal and Installation
REAR DOOR
DOOR STRIKER : Removal and Installation
REMOVAL
1. Remove door striker cover.
2. Remove TORX bolts, and then remove door striker.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Apply genuine high strength locking sealant or equivalent onto TORX bolts.
-
After installation, check door open/close, lock/unlock operation.
-
After installation, perform the fitting adjustment. Refer to See: Adjustments.