FX50 AWD V8-5.0L (VK50VE) (2009)
Power Seat Switch: Service and Repair
Lumbar Support Switch
Exploded View
LUMBAR SUPPORT SWITCH
Exploded View
Refer to See: Service and Repair/Front Seat/Exploded View.
Removal and Installation
LUMBAR SUPPORT SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the seat cushion outer finisher (1). Refer to See: Service and Repair/Front Seat/Removal and Installation.
2. Remove the lumbar support switch (2) from the seat cushion outer finisher with flat-bladed screw driver (A).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful to clamp the harness to the right place.