FX50 AWD V8-5.0L (VK50VE) (2009)
/Page-1780008.png)
c. If resistance value is more or less than listed above, replace the TED.
Seat Back
a. Disconnect TED connector.
^
Connector # B504 -driver side
^
Connector # B514 Passenger side
b. Measure TED resistance across pin 35 (blue wire) and pin 36 (yellow wire).
^
Acceptable resistance value: 1.3 - 1.8 ohms.
^
Resistance value given at room temperature or about 25°C / 77°F.
c. If resistance value is more or less than listed above replace the TED.
Thermal Electric Device (TED) Sensor
Seat Cushion
a. Disconnect TED connector.
^
Connector # B505 - driver side
^
Connector # B515 - passenger side
b. Measure TED sensor resistance across pin 33 (green wire) and pin 34 (also green wire).
^
Acceptable resistance value: Approximately 1000 ohms.
