FX50 AWD V8-5.0L (VK50VE) (2009)
Seat Memory Switch: Service and Repair
Removal and Replacement
SEAT MEMORY SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the front door finisher (1). Refer to See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Installation.
2. Press pawls and remove seat memory switch (2) from front door finisher (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to See: Mirrors/Memory Positioning
Systems/Testing and Inspection/Programming and Relearning/Additional Service When Removing Battery Negative Terminal/Description.