FX50 AWD V8-5.0L (VK50VE) (2009)
Install in the reverse order of removal.
CAUTION:
-
When installing door parting seal, check that blind clips are securely fitted in door panel holes, and then press them in.
-
When installing, visually check the door parting seal and the clips, then replace them with new parts if they are damaged.
-
Replace double-faced adhesive tape with a new one, if the rear door parting seal (front) is reused.
-
Remove double-faced adhesive tape remaining on body and back of rear door parting seal (front) with a double-faced adhesive tape
remover, after removing rear door parting seal (front).
-
Never wash the vehicle within 24 hours after installing so as to keep adhesive.