FX50 AWD V8-5.0L (VK50VE) (2009)
Brake Pedal Assy: Removal and Replacement
Exploded View
BRAKE PEDAL
Exploded View
Removal and Replacement
BRAKE PEDAL
Removal and Installation
REMOVAL
1. Remove instrument lower panel LH. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Exploded View.
2. Remove steering column assembly. Refer to See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column/Without
Electric Motor/Exploded View(without electric motor), See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering
Column/With Electric Motor/Exploded View (with electric motor).
3. Disconnect the stop lamp switch and ASCD brake switch harness connectors.
4. Disconnect the brake pedal stroke sensor harness connector (with pre-crash seat belt).
CAUTION:
Never removing brake pedal stroke sensor (with pre-crash seat belt).
5. Turn the stop lamp switch and ASCD brake switch counterclockwise to remove the stop lamp switch and
ASCD brake switch.
6. Remove snap pin and clevis pin from clevis of brake booster.
7. Remove cowl top cover. Refer to See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Exploded View.