FX50 AWD V8-5.0L (VK50VE) (2009)
6. Place the top of cross spring over the upper pad pin, press in the cross spring, install lower pad pin from the inner side to the outer side, and secure
cross spring.
7. Install clips to the pad pins.
CAUTION:
If clip is not fully attached, pad pin or brake pad could fall out while vehicle is in motion.
8. Depress the brake pedal several times to check that no drag feel is present for the rear disc brake. Refer to See: Procedures/Rear Disc Brake/Brake
Pad (2 Piston Type) See: Brake Caliper/Service and Repair/Removal and Replacement/Rear Disc Brake/Brake Caliper Assembly (1 Piston
Type)/Exploded View, "BRAKE PAD (2 PISTON TYPE) : Inspection".
Exploded View
REAR DISC BRAKE
BRAKE PAD (2 PISTON TYPE) BRAKE PAD (2 PISTON TYPE) : Exploded View