FX50 AWD V8-5.0L (VK50VE) (2009)
NOTE:
Use a disc brake piston tool to easily press piston.
4. Install upper pad pin from the inner side, then install firmly to the outer side through the hole in the top of brake pad.
5. Place the top of cross spring (1) over the upper pad pin (2), press in the cross spring, install lower pad pin from the inner side to the outer side, and
secure cross spring.
6. Install clips to the pad pins.
CAUTION:
If clip is not fully attached, pad pin or brake pad could fall out while vehicle is in motion.
7. Depress the brake pedal several times to check that no drag feel is present for the front disc brake. Refer to See: Disc Brake System/Brake
Pad/Service and Repair/Procedures/Front Disc Brake/Brake Pad (4 Piston Type) See: Front Disc Brake/Brake Caliper Assembly (2 Piston
Type)/Exploded View, "BRAKE PAD (4 PISTON TYPE) : Inspection".
Exploded View
FRONT DISC BRAKE
BRAKE PAD (4 PISTON TYPE) BRAKE PAD (4 PISTON TYPE) : Exploded View
Removal and Installation
FRONT DISC BRAKE