FX50 AWD V8-5.0L (VK50VE) (2009)
3. Correspond the measured dimension in crankshaft pin journal diameter column of "CONNECTING ROD
BEARING SELECTION TABLE".
4. Follow from step 3 in "WHEN NEW CONNECTING ROD AND CRANKSHAFT ARE USED".
CONNECTING ROD BEARING SELECTION TABLE
CONNECTING ROD BEARING GRADE TABLE
Connecting rod bearing grade table : Refer to "Connecting Rod Bearing". See: Specifications/Connecting Rod Bearing
UNDERSIZE BEARING USAGE GUIDE
-
When the specified connecting rod bearing oil clearance is not obtained with standard size connecting rod bearings, use undersize (US) bearings.
-
When using undersize (US) bearing, measure the connecting rod bearing inner diameter with bearing installed, and grind crankshaft pin so that the
connecting rod bearing oil clearance satisfies the standard.
CAUTION:
In grinding crankshaft pin to use undersize bearings, keep the fillet R (A) [1.5 - 1.7 mm (0.059 - 0.067 in)].
Bearing undersize table : Refer to "Connecting Rod Bearing". See: Specifications/Connecting Rod Bearing