FX50 AWD V8-5.0L (VK50VE) (2009)
2. Remove mounting screw (A), and then remove center ventilator grilles (1) (left and right).
INSTALLATION
Installation is basically the reverse order of removal.
Defroster Nozzle
DUCT AND GRILLE
DEFROSTER NOZZLE : Removal and Installation
REMOVAL
1. Remove side defroster nozzles. Refer to See: Exploded View.
2. Remove defroster nozzle (1).
INSTALLATION
Installation is basically the reverse order of removal.
Foot Duct
DUCT AND GRILLE
FOOT DUCT : Removal and Installation
REMOVAL
1. Set the temperature at 18.0°C (60°F).
2. Disconnect the battery cable from the negative terminal.
3. Remove heater and cooling unit assembly. Refer to See: Housing Assembly HVAC/Service and Repair/Exploded View (VQ35HR) or See:
Housing Assembly HVAC/Service and Repair/Exploded View (VK50VE).