FX50 AWD V8-5.0L (VK50VE) (2009)
Is the inspection result normal?
YES - INSPECTION END
NO - Repair harness or connector.
Component Inspection
SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT
Component Inspection
1.CHECK SEAT BELT BUCKLE SWITCH UNIT
1. Turn ignition switch OFF.
2. Disconnect the seat belt buckle switch connector.
3. Check continuity between terminals.
Is the inspection result normal?
YES - INSPECTION END
NO - Replace the seat belt buckle. Refer to See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Front Seat Belt/Removal
and Installation.