FX50 AWD V8-5.0L (VK50VE) (2009)
Headlamp Alignment Switch: Service and Repair
Headlamp Aiming Switch
Exploded View
HEADLAMP AIMING SWITCH
Exploded View
Removal and Installation
HEADLAMP AIMING SWITCH
Removal and Installation
REMOVAL
1. Remove the instrument driver lower panel. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Exploded View.
2. Disengage the pawls. And then remove the headlamp aiming switch.
INSTALLATION
Install in the reverse order of removal.