FX50 AWD V8-5.0L (VK50VE) (2009)
Coolant: Service and Repair
Refilling
ENGINE COOLANT
Refilling
1. Remove engine cover and engine room cover (LH). Refer to See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover/Exploded View.
2. Install reservoir tank if removed, and radiator drain plug.
CAUTION:
Be sure to clean drain plug and install with new O-ring.
Tightening Torque: : 1.2 Nm (0.12 kg-m, 11 in-lb)
If water drain plug on cylinder block is removed, close and tighten it. Refer to See: Engine, Cooling and Exhaust/Engine/Cylinder Block
Assembly/Service and Repair/Disassembly and Assembly.
3. Check that each hose clamp is firmly tightened.
4. Remove air relief plug (2) on radiator left side.
5. Remove air relief plug (1) on heater hose.