infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Spark Plug|Inspection|Page 1160 > < Spark Plug|Specifications|Page 1157
Page 1
background image

Spark Plug: Service and Repair
Inspection

SPARK PLUG

Inspection

INSPECTION AFTER REMOVAL
Use the standard type spark plug for normal condition.

Spark plug (Standard type) : Refer to EM-282, "Spark Plug". See: Engine, Cooling and Exhaust/Engine/Specifications/Spark Plug

CAUTION:
-

Never drop or impact spark plug.

-

Never use a wire brush for cleaning.

-

If plug tip is covered with carbon, use spark plug cleaner to clean.

Cleaner air pressure : Less than 588 kPa (6 kg/cm2, 85 psi)
Cleaning time : Less than 20 seconds

-

Measure spark plug gap. When it exceeds the limit, replace spark plug even if it is within the specified replacement mileage. Refer to See:
Engine, Cooling and Exhaust/Engine/Specifications/Spark Plug.

-

Spark plug gap adjustment is not required between replacement intervals.

Spark Plug|Inspection|Page 1160 > < Spark Plug|Specifications|Page 1157