FX50 AWD V8-5.0L (VK50VE) (2009)
2. Press the sonar sensor (1) outside the front bumper, pressing the metal clips on the back to the direction of black arrows.
INSTALLATION
Install the bumper when the pawl engages.
CAUTION:
The connector direction is within ±10° from the horizontal position when assembling the bumper.
A : Horizontal position
a : 10°
Navigation (Twin Monitor)
SONAR SENSOR
REAR : Removal and Installation
REMOVAL
1. Remove sonar sensor connector.
2. Press the sonar sensor (1) outside the front bumper, pressing the metal clips on the back to the direction of black arrows.
INSTALLATION
Install the bumper when the pawl engages.
CAUTION:
The connector direction is within ±10° from the horizontal position when assembling the bumper.