FX50 AWD V8-5.0L (VK50VE) (2009)
Braking Sensor/Switch: Service and Repair
Removal and Installation
BRAKE PEDAL STROKE SENSOR
Removal and Installation
REMOVAL
1. Remove the instrument panel lower cover LH. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Installation.
2. Disconnect the brake pedal stroke sensor connector.
3. Remove the screws (A).
4. Remove the brake pedal stroke sensor (1).
INSTALLATION
Install in the reverse order of removal.