Infiniti Workshop Service and Repair Manuals

Headlamp Alignment Sensor: Service and Repair
Removal and Installation

HEIGHT SENSOR

Removal and Installation

REMOVAL
1. Remove the height sensor mounting nut.
2. Remove the height sensor lever link bracket mounting bolt.
3. Disconnect the height sensor connector.
4. Remove the height sensor.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Perform the levelizer adjustment when removing the height sensor. 

Refer to See: Lighting and Horns/Testing and Inspection/Programming and Relearning/Additional Service When Replacing Control
Unit/Description See: Lighting and Horns/Testing and Inspection/Programming and Relearning/Additional Service When Replacing Control
Unit/Special Repair Requirement See: Lighting and Horns/Testing and Inspection/Programming and Relearning/Levelizer
Adjustment/Description See: Lighting and Horns/Testing and Inspection/Programming and Relearning/Levelizer Adjustment/Special Repair
Requirement, "LEVELIZER ADJUSTMENT : Special Repair Requirement".