FX50 AWD V8-5.0L (VK50VE) (2009)
Power Window Switch: Service and Repair
Front Power Window Switch (Passenger Side)
Front and Rear Window Anti-Pinch
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Removal and Installation
REMOVAL
1. Remove the front door finisher. Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Exploded View and See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Installation.
2. Front power window switch (passenger side) (1) is removed from front power window switch finisher (2) using flat-bladed screw driver (A) etc.
CAUTION:
Never fold pawl of front door finisher.
INSTALLATION
Install in the reverse order of removal.
NOTE:
If front power window switch (passenger side) is replaced or is removed, it is necessary to perform the initialization procedure.
Front Window Anti-Pinch
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Removal and Installation
REMOVAL
1. Remove the front door finisher. Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Exploded View and See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Installation.
2. Front power window switch (passenger side) (1) is removed from front power window switch finisher (2) using flat-bladed screw driver (A) etc.
CAUTION:
Never fold pawl of front door finisher.