FX50 AWD V8-5.0L (VK50VE) (2009)
Refilling
1. Remove filler plug (1). Fill with new gear oil until oil level reaches the specified level near filler plug mounting hole.
Oil grade and Viscosity : Refer to "Fluids and Lubricants". See: Maintenance
Oil capacity : Refer to "General Specifications". See: Specifications/Mechanical Specifications/Front Final Drive F160A/General
Specifications
2. After refilling oil, check oil level. Set a gasket to filler plug (1), then install it to final drive assembly. Refer to See: Service and
Repair/Overhaul/Front Final Drive F160A/Side Shaft/Exploded View.
CAUTION:
Never reuse gasket.