FX50 AWD V8-5.0L (VK50VE) (2009)
Refilling
1. Remove the filler plug and gasket from the rear final drive assembly.
2. Fill the rear final drive assembly with new differential gear oil until the level reaches the specified level near the filler plug hole.
Oil grade and viscosity : Refer to "Fluids and Lubricants". See: Maintenance
Oil capacity : Refer to "General Specification". See: Specifications/Mechanical Specifications/Rear Final Drive R230/General Specification
3. Install the filler plug with a new gasket on it to the rear final drive assembly. Tighten to the specified torque. Refer to See: Service and
Repair/Overhaul/Rear Final Drive R230/Differential Assembly/Exploded View, "Exploded View".
CAUTION:
Never reuse gasket.