FX50 AWD V8-5.0L (VK50VE) (2009)
Fluid - Transfer Case: Service and Repair
Refilling
TRANSFER FLUID
VK50VE : Refilling
1. Remove filler plug (1) and gasket. Then fill fluid up to mounting hole for the filler plug.
Fluid and viscosity : Refer to "Fluids and Lubricants". See: Maintenance
Fluid capacity : Refer to "General Specifications". See: Specifications/Mechanical Specifications
CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
2. Leave the vehicle for 3 minutes, and check the fluid level again.
3. Set a new gasket onto filler plug, and install it on transfer and tighten to the specified torque.
CAUTION:
Never reuse gasket.