FX50 AWD V8-5.0L (VK50VE) (2009)
Wiper Motor: Service and Repair
Removal and Replacement
REAR WIPER MOTOR
Removal and Installation
REMOVAL
1. Remove the rear wiper arm. Refer to See: Wiper Arm/Service and Repair/Rear Wiper Arm.
2. Remove the back door finisher inner. Refer to See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Back Door Trim/Exploded View.
3. Disconnect the rear wiper motor connector.
4. Remove the rear wiper motor mounting bolts.
5. Remove the rear wiper motor from the vehicle.
6. Remove the pivot seal.
INSTALLATION
1. Install the pivot seal.
2. Install the rear wiper motor to the vehicle.
3. Connect the rear wiper motor connector.
4. Operate the rear wiper to the auto stop position.
5. Install the back door finisher inner. Refer to See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Back Door Trim/Exploded View.
6. Install the rear wiper arm. Refer to See: Wiper Arm/Service and Repair/Rear Wiper Arm.