infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Campaign - Seat Heater Harness Modification|Page 12833 > < Campaign - Seat Heater Harness Modification|Page 12831
Page 7
background image

^

Cut off one or more of the connectors (see Figure 10).

Re-Assembly

18.

Re-install two screws to the front of the Center Console.

Make sure the console is correctly aligned before tightening the screws.

19.

Re-install the Center Console/Boot Assembly as follows:

a. Re-connect the Storage Pocket Light Connector to the console.

b. Re-connect the Hazard Light Switch connector to the console.

c. Re-install the console, making sure:

^

The console is correctly aligned.

^

The console fully and securely snaps into place.

20.

Re-connect the battery.

21.

Reprogram all radio station pre-sets.

Campaign - Seat Heater Harness Modification|Page 12833 > < Campaign - Seat Heater Harness Modification|Page 12831