G35 Coupe V6-3.5L (VQ35DE) (2003)
Body Control Module: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer's Scan Tool (Infiniti CONSULT-II)
CONSULT-II INSPECTION PROCEDURE
1. With the ignition switch OFF connect CONSULT-II and CONSULT-II CONVERTER to the data link connector then turn the ignition switch ON.
2. Touch "START(NISSAN BASED VHCL)".
3. Touch "BCM" on "SELECT SYSTEM" screen.
If BCM" is not indicated, go to See: Diagrams/Diagnostic Aids/CONSULT-II Checking System, "CONSULT-II Data Link Connector (DLC)
Circuit"