G35 Coupe V6-3.5L (VQ35DE) (2003)
5.
Remove the transmission oil pan plug to drain the ATF. Then reinstall the drain plug with a new gasket. Tighten the drain plug to: 29 - 39 N-m
(3.0 - 4.0 kg-m, 22-29 ft-lb).
6.
Remove the transmission oil pan.
7.
Disconnect connectors shown in Figure 2.
Caution:
Be careful not to damage connectors.
8.
Remove bolts A, B and C from control valve assembly.
9.
Remove the control valve assembly from the transmission case.
CAUTION:
When removing, be careful with the manual valve and the manual plate. Remove straight down, don't tilt it.
Install the new Control Valve Assembly:
10.
Install the Control Valve Assembly to the transmission case.
CAUTION:
When installing, be careful with the manual valve and the manual plate. Install straight up, don't tilt it.