G35 Sedan V6-3.5L (VQ35DE) (2004)
Oil Cooler: Service and Repair
OIL COOLER
OIL COOLER
REMOVAL
1. Remove undercover with power tool.
2. Drain engine coolant.
CAUTION: Do not spill coolant on the drive belt.
3. Remove oil filter.
4. Remove water hoses from oil cooler.
Remaining coolant in piping will come out. Use a tray to collect it.
5. Remove connector bolt, and remove oil cooler.
INSTALLATION
Install in the reverse order of removal paying attention to the following.
Align notch on oil cooler with protrusion on oil pan (upper) side, and tighten connector bolt.
INSPECTION AFTER INSTALLATION