G35 Sedan V6-3.5L (VQ35DE) (2004)
Power Steering Pump: Service and Repair
Removal and Installation
REMOVAL
1. Remove engine cover.
2. Remove air cleaner box.
3. Drain water from radiator upper tank, then remove radiator upper hose.
4. Remove radiator fan shroud.
5. Loosen idler pulley, then remove belt.
6. Drain power steering fluid from reservoir tank.
7. Remove piping of high pressure and low pressure (drain fluid from their pipings)
8. Remove bolt common to water pump and power steering pump.
9. Remove bolt then remove power steering pump.
INSTALLATION
Install in the reverse order of removal.
^
After installation, adjust belt tension.
^
After installation, bleed air.
INSPECTION BEFORE DISASSEMBLY