G35 Sedan V6-3.5L (VQ35HR) (2008)
Engine Control Module: Testing and Inspection
TERMINAL LAYOUT
PHYSICAL VALUES
NOTE:
-
ECM is located behind the instrument assist lower panel. For this inspection, remove passenger side instrument lower panel.
-
Specification data are reference values and are measured between each terminal and ground.
-
Pulse signal is measured by CONSULT-III.
CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor.
Use a ground other than ECM terminals, such as the ground.