G35 Sedan V6-3.5L (VQ35HR) (2008)
Headlamp Alignment Sensor: Removal and Replacement
HEIGHT SENSOR
Exploded View
EXL-199 Exploded View
Removal and Installation
REMOVAL
1. Remove the height sensor mounting nut.
2. Remove the height sensor lever link bracket mounting bolt.
3. Disconnect the height sensor connector.
4. Remove the height sensor.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Perform the levelizer adjustment when removing the height sensor. Refer to EXL-7, "LEVELIZER ADJUSTMENT: Special
Repair Requirement". See: Lighting and Horns/Headlamp/Adjustments/Levelizer Adjustment