G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Trunk / Liftgate Latch: Service and Repair
Removal and Installation of Trunk Lid Lock
REMOVAL
1. Remove the trunk lid finisher. Refer to "TRUNK ROOM TRIM & TRUNK LID FINISHER".
2. Disconnect the trunk lid emergency opener cable from the trunk lid lock.
3. After removing the harness connector, remove the mounting bolts, and remove the trunk lid lock.
INSTALLATION
1. Install in the reverse order of removal.
2. After installing, close the trunk lid height. Perform the lock and surface height adjustment. Refer to BL-176, "Fitting Adjustment". See:
Adjustments
3. After installing, check the operation.