G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Radiator Support: Service and Repair
RADIATOR CORE SUPPORT
Removal and Installation
REMOVAL
1. Remove hood assembly. Refer to "Removal and Installation of Hood Assembly".
2. Remove front bumper, bumper reinforcement and bumper bracket. Refer to "Removal and Installation"
.
3. Remove hood lock assembly, then remove hood lock cable.
4. Remove washer tank. Refer to "Removal and Installation of Washer Tank".
5. Remove horn connectors.
6. Remove mounting harness clip on radiator core support assembly, the harness is separate.
7. Remove resonator mounting screws. Refer to "AIR CLEANER AND AIR DUCT".
8. Remove air intake duct (LH/RH), and remove washer tank inlet clip.
9. Remove headlamp (LH/RH).
10. Remove upper radiator bracket.