G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
4. Remove headrest holder (with active headrest).
From the back of the seatback, press the headrest holder tab of the stay pipe hole to disengage. Then pull the headrest holder up to remove.
NOTE: Before installing the headrest holder, check its orientation (front/rear and right/left).
5. Remove headrest holder (without active headrest).
Squeeze and pull up headrest holder tabs to remove from seatback frame.
NOTE: Before installing the headrest holder, check its orientation (front/rear and right/left).
6. Remove the seat heater harness connector. After removing the seatback trim and pad, remove the hog ring to separate the trim, pad, and seatback
heater unit.
Assembly
Assemble in the reverse order of disassembly.