G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
14.
Remove the four (4) bolts and two (2) nuts securing the Seat Lifter Motor Unit Assembly (see Figure 13).
15.
Remove the motor unit assembly from its mounting position and set it out of the way (see Figure 14).
IMPORTANT:
Please pay close attention to step 16.
16.
Place the lifter and slide assembly in the vehicle and secure it to the floor using all 4 seat mounting bolts.
^
This step is IMPORTANT to maintain proper alignment of the slide assembly when the lifter link is removed.