G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
/Page-2119014.png)
^
Tighten the 4 nuts in the order shown in Figure 17.
^
Tightening torque: 20.6 - 26.5 Nm (2.1 - 2.7 kg-m 16 - 19 lb.ft)
^
The new front lifter link assembly is listed in the parts information section of this bulletin.
20.
Reinstall the seat belt bracket.
^
Torque the 2 M108 "black" nuts to: 43.5-58 Nm (4.4-5.9 Kg-m m, 32.43 ft.lb.)
21.
Remove 1 nut and the attached looped bracket located on the rear part of the lifter link assy.
22.
Remove remaining 3 nuts holding the rear lifter link assy. then remove the assy.
New Rear Lifter Link Installation
23.
Install new rear lifter link assy. from the Parts Information section of this bulletin and the looped bracket.
