G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
/Page-1485003.png)
3. Secure flange of cylinder body as shown in the figure.
CAUTION:
^
Using copper plate or cloth to cover flange when securing in a vise.
^
When securing master cylinder assembly in a vise, be sure not to over tighten.
^
Be sure to fix the flange part with the brake tube installation side of cylinder body up.
4. Using a pin punch [commercial service tool: diameter approximately 4 mm (0.16 inch)], insert the reservoir tank mounting pin into the pin hole
so that the attachment side and the opposite side are identical.
DISASSEMBLY (FOR AWD MODEL)
1. Secure flange of cylinder body in vise shown in the figure.
CAUTION:
^
Using copper plate or cloth to cover flange for fixing vise.
^
When securing master cylinder assembly in a vise, be sure not to over tighten.
^
Be sure to fix the flange part with the brake tube installation side of cylinder body down.
2. Using a pin-punch [commercial service tool: diameter approximately 4 mm (0.16 inch)], remove pin form reservoir sank.
3. Remove master cylinder assembly from vise.
4. Remove reservoir tank and grommet from cylinder body.
