G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
/Page-1485005.png)
1. Apply brake fluid to the inner wall of cylinder body, primary piston assembly and secondary piston assembly.
2. Insert secondary piston and primary piston assembly into cylinder body in this order.
CAUTION:
^
Do not reuse primary and secondary piston assemblies.
^
Always replace inner kit as a set.
^
Pay attention to the orientation of piston cup, and insert straight to prevent cup from being caught by the inner wall of cylinder.
3. Set the slit of secondary piston towards the piston stopper mounting hole of cylinder body. And then install the piston stopper through the slit of
secondary piston.
4. Insert plate and guide assembly into cylinder body.
CAUTION:
^
Be careful not to damage rod of primary piston.
^
Pay attention to the orientation of guide assembly.
^
Do not drop O-ring.
^
Be careful the guide and/or plate are not inserted at an angle to cylinder inner wall.
5. Be careful not to damage rod of primary piston with the cloth. Then insert snap ring to cylinder body with pushing primary piston.
CAUTION:
