G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
2. Check valve operation.
3. Then check if valve closes at 5°C (9°F) below valve opening temperature.
INSTALLATION
Note the following, and install in the reverse order of removal.
^
Be careful not to spill engine coolant over engine room. Use rag to absorb engine coolant.
INSPECTION AFTER INSTALLATION
^
Check for leaks of engine coolant using radiator cap tester adapter [SST: EG17650301 (J-33984-A)] and radiator cap tester (commercial service
tool). Refer to "LEAK CHECK".
^
Start and warm up engine. Visually make sure that there is no leaks of engine coolant and A/T fluid (A/T models).