G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
/Page-609001.png)
Intake Manifold: Specifications
Tightening Torque & Sequence
Intake Manifold
If stud bolts were removed, install them and tighten to the specified torque.
Tightening Torque ................................................................................................................................ 9.8 - 11.8 Nm (1.0 - 1.2 kg-m, 87 - 104 inch lbs.)
Tighten all mounting bolts and nuts to the specified torque in two or more steps in numerical order shown in the figure.
G1st step
Tightening Torque ........................................................................................................................................... 4.9 - 9.8 Nm (0.5 - 1.0 kg-m, 4 - 7 ft. lbs.)
2nd step and after
Tightening Torque ..................................................................................................................................... 6.5 - 31.4 Nm (2.7 - 3.2 kg-m, 20 - 23 ft. lbs.)
