G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
30. Remove O-rings from cylinder head.
31. Remove O-rings from cylinder block.
32. Remove timing chain tensioners (secondary) from cylinder head as follows, if necessary.
a. Remove camshaft brackets (No. 1). Refer to "REMOVAL".
b. Remove timing chain tensioners (secondary) with stopper Din attached.
33. Use scraper to remove all traces of liquid gasket from front and rear timing chain cases, and opposite mating surfaces.
^
Remove old liquid gasket from bolt hole and thread.
34. Use scraper to remove all traces of liquid gasket from water pump cover, chain tensioner cover and intake valve timing control covers.