G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
/Page-617015.png)
8. Make sure again that the mating marks on sprockets and timing chain have not slipped out of alignment.
9. Install new O-rings on rear timing chain case.
10. Install front oil seal on front timing chain case. Apply new engine oil to the oil seal lip, dust seal lip and outer round of oil seal.
^
Install it so that each seal lip is oriented as shown in the figure.
^
Using suitable drift, press-fit oil seal until it becomes flush with timing chain case end face.
^
Make sure the garter spring is in position and seal lip is not inverted.
11. Install water pump cover and chain tensioner cover to front timing chain case.
^
Apply a continuous bead of liquid gasket with tube presser [SST: WS39930000 ( - )] to front timing chain case as shown in the figure.
Use Genuine RTV Silicone Sealant or equivalent. Refer to "RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS".
12. Install front timing chain case as follows:
