G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
/Page-620004.png)
18. Remove O-rings from rear timing chain case.
19. Remove oil pan gasket. Refer to "OIL PAN AND OIL STRAINER".
20. Remove water pump cover and chain tensioner cover from front timing chain case.
^
Use seal cutter [SST: KV10111100 (J-37228)] or equivalent tool to cut liquid casket for removal.
21. Remove front oil seal from front timing chain case using suitable tool.
^
Use flat-bladed screwdriver for removal.
CAUTION: Be careful not to damage front timing chain case.
22. Remove timing chain (primary) and related parts. Refer to "TIMING CHAIN".
23. Use scraper to remove all traces of old liquid gasket from front and rear timing chain cases and oil pan (upper), and liquid gasket mating surfaces.
CAUTION: Be careful not to allow gasket fragments to enter oil pan.
^
Remove old liquid gasket from bolt hole and thread.
INSTALLATION
1. Install timing chain (primary) and related parts. Refer to "TIMING CHAIN".
